Menu
DIY / Mantles / rustic wood / woodworking

Faux Shiplap Fireplace with Real Heart

This spring our church partnered with Habitat for Humanity to build a home for a wonderful family. It was an exciting experience to participate in, even in a small way.  Our family was only able to work one Saturday, but as soon as the partnership was announced I had a little tug in my heart to build something special for this family.

shiplapfireplacefull

It didn’t take long for me to settle on the idea of a faux fireplace as our gift.  Not only would a fireplace add a nice focal point to the living room, I had one particular event in mind.  You see, the homeowner has several small children and come Christmas, I wanted them to have a place to hang their stockings.  One of the special memories we cherish from Christmas when the children were younger was the joy on their faces when we lifted the stocking off the mantel and they gleefully, dumped the contents to reveal what special treats Santa had tucked inside.

At the kick off event, I spoke to the homeowner about my idea and she was thrilled.  She totally embraced the idea, rough as the specifics were at the time, she put her trust me and I was so happy.

The day we volunteered we took some measurements and came up with a general plan.  One small obstacle was going to be the location of the cable outlet.  So, we designed the firebox to fit around, it allowing the cable to go up through the fireplace so that the homeowner could hang a TV above the mantel if she wanted to.

In advance of the installation day, I cut and washed all the boards. To keep costs down and because untreated cedar fence boards seemed to be my “go to” product for my projects, that was the wood of choice.

washedboards

The boards were cut to 66 1/4″ and washed rather simply with watered down paint, Sherwin Williams, Natural Choice.

To build the mantle, I used the same design and techniques I did for my outdoor faux beam mantel. You can read the complete tutorial for building this mantel.

mantelbox

I had asked the homeowner about the stain for the mantel and she wanted a finish that coordinated with her cabinets, so I used a Walnut finishing cloths stain and aged it with just a bit of Weathered Wood from Varathane.

habitathome

So fast forward to the day of the dedication when she took possession of the house, we returned to with the supplies to build her the faux fireplace and mantel right after everyone left. We brought along as many of our portable tools as possible.  We didn’t have an exact measurement for the 2×4’s that would fit the height from floor to ceiling.

cutboards

After they were cut to size we found the studs and nailed 2×4’s directly into the studs.

nailtostuds

Then we began nailing the fence boards or “shiplap” to the studs.  We simply butt them up against each other nailing them into the studs.

nailshiplap

 

moreboards

And then, using wood screws, hung the 2×4 that would serve as a cleat for the mantel.

cleatformatel

As we moved down from the top and reached the area around the firebox we realized we had had a miscommunication and the side panels that would go around the firebox weren’t going to fit the way I had precut and planned.

endofday1

So, I returned a few days later with the corrected side panels and finished out the fireplace. And the best part?  When I needed an extra hand the homeowner helped me finish the job!   Two women, building a fireplace. That was cool.

We finished the sides with fence panels that had been ripped on the table saw to act as trim, nailing into the edge of the front boards. The fence panels we used were a great to work with and really good quality so I hope they last a long time!

sideprofilemantel

Then we hung the mantel by screwing through the top of the mantel, into the cleat.

The firebox fits inside the 2×4 supports.  I cut out a hole for the cable and covered it with “firewood”.

fireboxstart

Once the side shiplap boards were in place, I taped and painted out the edges as well as the sides of the exposed 2×4’s that acted as the supports in the same black.  This created a bit more depth for the box itself.

To give a more realistic look to the whole project, I created a hearth using remnant tile on top  of 1/4″ plywood. I adhered and  “grouted” the tile with coordinating sanded tile caulk.

sidefirebox

I finished the edge with a scrap piece of fence board.

If you look closely, you can see the extra piece of wood I brought to hide the opening for the cable.  For security, I nailed as many of the log pieces in place as possible.  I mentioned to the homeowner that I would be happy to come back and do whatever was needed to hide her cable.

And of course we needed some firewood, so we trimmed some branches from a fallen tree in our woods up the hill> The size was perfectly proportional.

There you have it, a faux shiplap fireplace with a beam mantle and tile hearth!

shiplapfireplace

Since the homeowner was just beginning to move in, I remembered to grab a few items from my house to stage it up for the blog. Wink, wink!

Here’s the bit of info that might excite you if you wanted to build your own.  The estimated cost breakdown.

20 untreated fence boards $50

3 2x4x8  $7.50, one for the cleat, two for the supports

1 sheet of 1/4 plywood  $23

6 tiles $12 (We had some remnant tiles laying around)

Tile Caulk $7

Total Estimated Cost $101.50

But honestly, I had never really added up the cost until now.  It was just a project that God placed on my heart and I was going to find a way to complete it.

But the fact that this turned out to be an inexpensive project makes me happy because hopefully if you desire faux fireplace and mantel in your home, you’ll be inspired to build one like this!

howtoshiplapfireplace

 Sharing Here: Think and Make Thursday  ||  Work it Wednesday  ||  Pin Junkie Link Party  || That DIY Party  || Tutorials and Tips Link Party

5 Comments

  • Kimm at Reinvented
    June 17, 2015 at 6:28 am

    Oh. my. goodness. this is amazing! I love it so much. Our church has participated in a couple of Habitat builds, and my hubby and I would love to get involved, but so far we haven’t made the time. You have inspired me to do what it takes to make sure we are involved in the next one!
    And about Haven…I was so shy and insecure last year I had myself in tears. We can do this! I will watch for your pretty face and introduce myself! 🙂

    Reply
    • Leslie
      June 18, 2015 at 5:42 pm

      Thanks so much Kimm! I can’t tell you how much joy it brought me to build this for her. She was so pleased with the look she decided not to hang her tv on it and decorate it herself. Love that! See you at Haven!

      Reply
  • […] Paper Daisy Design […]

    Reply
  • Danielle
    November 11, 2018 at 11:24 am

    This is beautiful! Do you think you could add an electric firebox? I’m dying to have a fireplace in my house for hanging Christmas stockings!

    Reply
  • […] Build It Hexagon Tabletop Or Fire Pit Cover – deeplysouthernhome.com […]

    Reply

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.