Menu
Bathroom / Build it / woodworking

Build a Heavy Duty Bathroom Vanity or Table

This little vanity table is more than just a pretty addition to our powder room, she’s a true heavyweight.  Initially, the vanity was going to support a vintage sink that weighed nearly 60 lbs. I had searched for an antique piece of furniture, small enough to fit in the space but still sturdy enough to support the sink.  In the end, building a custom antique-inspired table that could withstand that constant weight was the most practical solution.
patterned-wall-tile-powder-room-3377

Because of the limited space, I had very specific dimensions to adhere to. And as much as I would have loved to find the perfect antique washstand or table, I didn’t have time to hunt one down.

Once I decided to build my own, I searched out table legs and found these beauties from Osborne Wood Products.  They are simple, yet they have some excellent detail and were not a farmhouse style, which I was trying to avoid. They were also sturdy and could be ordered in the perfect size needed for my vanity.

patterned-wall-tile-powder-room-3365

Here is the original vintage sink I was going to use. It was extremely heavy and is actually why I designed and built the table to be so incredibly sturdy.

diy-vanity-table-7197

But once the table was built and we moved it into the space, I decided the look was all wrong. The antique wall-mounted sink just looked odd sitting on the table.

I searched for a new rectangular sink as a replacement and was much happier with the more modern choice. The new sink provided the perfect mix of old and new, creating a fresh, timeless powder room.

patterned-wall-tile-powder-room-3364

The new ceramic sink is still a bit weighty, so I am happy we added extra support to the structure.

hexagon-tile-bathroom-3340

So let’s get to the building, shall we? While I’m calling this a vanity or wash table, the basic building plan for this could easily be stretched to build a table of any size.

How to Build a Vanity Table or Heavy-Duty Table

The key change in the building plan for this table, the part that makes it extremely sturdy, is the extra bracing added to the four corners of the table.  Don’t get me wrong, we totally believe in the durability of the Kreg Jig and actually still use them in this project, but like I said, the table was initially going to support a 50-60 lb sink.  We would prefer to overbuild than find our table bowing under the sink’s weight.  It’s so sturdy I wouldn’t hesitate to stand on it to change the lightbulbs!

vanity-table-plans

 Materials List

(4) furniture legs (I used this Lakeland Dining Table leg, but Osborne offers an extensive selection of styles.)

(2) 1 x 6 x 8 ft boards, for the top
(The wood I used was reclaimed and quite irregular. Making my final board size around 6.5.)

(1) 2 x 6 x 8 ft boards, for the apron

1 1/4 Coarse Thread Pocket Hole Screws

Wood Glue

Threaded inserts, Nuts, Washers, Threaded Rod-All 3/8″

Helpful Tools

Tape Measure & Speed Square

Circular or Miter Saw

Jig Saw

Planner

Sander

Pocket Hole Jig

Drill

Clamps

Nail Gun

  1. Assemble the legs and wood pieces and cut to the size desired. (See diagram for reference. I firmly believe that you will want to build to suit your needs.)

diy-vanity-table-7155

2. To prep, the legs for the heavy-duty support structure, use a square to draw a 1″ line on two sides of the table leg. This will be a guide for an angled notch.

diy-vanity-table-7162

It should look like this.

diy-vanity-table-7165

3. Using a circular saw, carefully cut the inside end straight.

diy-vanity-table-7166

4. Using a jig saw with the plate turned to a 45-degree angle, cut on the guidelines.  We tried this on a scrap with the circular saw and were unsuccessful in achieving a proper cut.
diy-vanity-table-7168

5. Next drill two holes in the angled side you created to accept threaded inserts. Add wood glue to the hole and use a chisel to screw in the threaded inserts into the holes.

table-leg-prep

6. Using a Kreg Jig, make pocket holes in the apron fronts and sides of your table.

diy-vanity-table-7182

Be sure to mark where the screws will be attached in advance.  This will ensure you are not trying to drill into an area that already has threaded inserts.

diy-vanity-table-7180

7. Attach the aprons to the legs with 1 1/4 screws and wood glue

diy-vanity-table-7185

For ease of positioning the apron pieces, we used a scrap piece of wood to act as a spacer. (I believe it was a 1″ square dowel.)

diy-vanity-table-7184

diy-vanity-table-7186

8. With your apron sides in place, use a scrap piece of 1×4 to bridge anchor the sides together.

diy-vanity-table-7179

To find the exact length these boards needed to be cut we held them at a 45-degree angle and drew a line. Then we cut the wood on a miter saw to follow that angle.

9. Cut boards to the angle traced.

10. In order to easily attach the boards to the corner insets, nail the boards with a nail gun.

diy-vanity-table-7188

10. Drill holes to line up with the inserts.

diy-vanity-table-7189

11. Using the 3/8 inch threaded rod, nuts, washers and bolts, secure the angle brace to the corner.

diy-vanity-table-7175

12. Repeat this process for all four legs.

diy-vanity-table-7190

13. For additional center support, we added to more 2×6’s on either side with pocket joinery, to either side of the drain hole for the sink. (With the vintage sink we were going to use, a much larger hole would have needed to be cut.  The support around this larger hole was imperative.)

vanity-drain-8689

vanity-drain-8688

The pea trap is currently in the basement just below the room. The plumber assured us that is to code and I am happy to have no visible pipes.

How to Build a Vanity Top (with a biscuit Joiner & tips for using reclaimed wood)

1. Given the size of your table base, determine how many boards you will need to cover the top and have an overhang on all four sides.  (I chose to have a larger overhang on the sides than the front.)

2. If your boards are not straight, rip them with a table saw to create a straighter edge.

diy-vanity-table-7353

3. Line up your boards and draw a straight line between connecting boards marking the position of the biscuit joints.  It is a good idea to offset the joints on alternating boards.

4. Using the fence of the Biscuit Jointer, align the guide to the lines on the wood and cut indentations for the biscuits.

diy-vanity-table-8026

4. Repeat this process on all joined sides of the boards.

diy-vanity-table-8019

5. It is extremely helpful, especially when you are dealing with reclaimed wood, to test the joints in sort of a dry run before gluing the biscuits up.

6. After the joints have been checked, add glue to both the biscuit and the slot. Also, add wood glue all along the edge of the wood.

diy-vanity-table-7363

diy-vanity-table-7362

6. Secure the pieces with clamps and allow to dry overnight if possible.
diy-vanity-table-7366

7. Once the wood is dry, remove the clamps and use an electric hand planer to smooth out the boards. If you are using new wood you will likely be able to skip this step.

diy-vanity-table-7409

Be sure to use clamps when using a planer. (Mine are just out of the photo.)

3. Depending on how rough cut the wood is you may choose to pass the planner over all of the boards to create a level surface and a smooth, finish.

diy-vanity-table-7411

diy-vanity-table-7415

4. Cut the outside edges of the wood to create a finished edge. Because our vanity top is fairly small we could easily do this on a table saw. If you are making a large table or countertop, a circular saw is a great option.

diy-vanity-table-7574

5. Sand the wood with increasing levels of sandpaper. I usually start with 80, move up to 120, 200, and finish with 400.

diy-vanity-table-7412

Now you are ready to finish your table and top! I’ll be posting detailed instructions on the unique finishes I used for my table soon.

diy-vanity-table-7897

You may also want to check out the reveal post of the powder room here.  You won’t believe the transformation of this little room.

hexagon-tile-bathroom-3311

3 Comments

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.